Valve trombone

From Wikipedia, the free encyclopedia
Valve trombone
Valve (tenor) trombone in B♭
Brass instrument
Classification
Hornbostel–Sachs classification423.233.2
(Valved aerophone sounded by lip vibration with cylindrical bore longer than 2 metres)
DevelopedMid 19th century
Related instruments
Musicians
Builders

The valve trombone is a brass instrument in the trombone family that has a set of valves to vary the pitch instead of (or in addition to) a slide. Although it has been built in sizes from alto to contrabass, it is the tenor valve trombone pitched in B which has seen the most widespread use. The most common valve trombone has three piston valves, and plays just like a trumpet but an octave lower. They are built in either short or long form.

History[edit]

The valve trombone enjoyed its greatest popularity in the 19th century, when the technology of rotary and piston brass instrument valves was developing rapidly. They became popular in European orchestras particularly in Italy and Austria, where composers wrote with a section of three valve trombones in mind.[1] The valve trombone was also popular in bands in the mid to late 19th century, particularly in America. In New Orleans the slide trombone did not appear until the "tailgate" style of playing around 1904.[2]

Six-valved cavalry trombone by Adolphe Sax, ca. 1863. Metropolitan Museum of Art, New York[3]

Valve trombones were made in many configurations for marching bands, and in particular for mounted bands. A type of cavalry trombone invented by Adolphe Sax in the 1860s has six valves, instead of the usual three, one for each position on the trombone slide. Instead of adding tubing, these valves isolate different amounts of tubing from the total length.[1] Their unusual shape was designed to make it easier for players in cavalry bands to hold and use while mounted.[3]

Valved alto trombones in E♭ were occasionally built but remain rare instruments; a few survive in museums.[4]

A contrabass valve trombone known as the trombone basso Verdi was developed in the late 19th century and is used mainly in operas by Verdi and Puccini. This instrument was the prototype for the modern cimbasso, which has seen a 21st century revival in video game music and film scores.[5]

By the beginning of the 20th century, mass production of reliable instruments with high quality slides led to a return to popularity of the slide trombone. Despite this, valve trombones still remain popular in parts of eastern Europe and Italy, in military bands and brass bands in South America and India, and in jazz, often as a doubling instrument for trumpet players.

Performance characteristics[edit]

Former trombonist of ska punk band We Are the Union performs on a valve trombone

Some passages, particularly fast musical figures, are easier to execute on a valve trombone than on a slide trombone. Italian composers in particular, such as Verdi and Rossini, made use of its agility. The valve trombone is also useful for situations when the movement of a slide can be impractical, such as when marching, mounted, or playing in a cramped orchestra pit. Many players consider the tone of a valve trombone to be stuffier and less open, and it is no longer common in orchestras.

In Jazz[edit]

As the B tenor valve trombone uses the same fingering as the B trumpet, it is occasionally a doubling instrument for jazz trumpeters. Notable jazz musicians who play the B tenor valve trombone include Maynard Ferguson, Bob Brookmeyer, Clifford Thornton, Juan Tizol of the Duke Ellington Orchestra, Rob McConnell and Bob Enevoldsen.

Normaphone in B♭ c. 1928 by Heber. St Cecilia's Hall, University of Edinburgh

In the 1920s a valve trombone reconfigured into a saxophone shape was developed in Germany, called the normaphone (German: Normaphon). It was later taken up by American jazz musicians, including William "Hicky" Kelly in the 1960s and Scott Robinson in the 70s.[6]

Hybrid slide-valve trombones[edit]

Trombones that combine both a slide with a set of valves were built as early as the 1860s by Besson.[1]: 46–7  One of the earliest surviving examples was built by C.G. Conn in 1884, and closely resembles the modern "superbones" developed since the 1970s.[7] A "valide" (a portmanteau of "valve" and "slide") was invented in the 1940s by jazz musician and machinist Brad Gowans, with three piston valves and a short four-position slide.[8] The only known instrument now resides at the Institute of Jazz Studies at Rutgers University.[9]: 200 

Superbone[edit]

In the 1970s Maynard Ferguson and Larry Ramirez of Holton Musical Instruments developed the Holton TR-395 "Superbone" for Ferguson to use in his band. It is similar to the 19th century instruments, with a very narrow bore of 0.484 inches (12.3 mm) and three piston valves, and adds a slide lock which frees the player to operate the valves or the slide with either hand. Holton patented and manufactured it between 1974 and 2004.[10][1]: 143  Later versions were developed in the early 21st century: James Morrison developed a superbone with Austrian instrument manufacturer Schagerl, which uses a larger 0.525-inch (13.3 mm) bore and three rotary valves, and Wessex Tubas manufacture a larger bore superbone similar to the Holton.[11][12]

References[edit]

  1. ^ a b c d Yeo, Douglas (2021). An Illustrated Dictionary for the Modern Trombone, Tuba, and Euphonium Player. Dictionaries for the Modern Musician. Illustrator: Lennie Peterson. Lanham: Rowman & Littlefield. ISBN 978-1-538-15966-8. LCCN 2021020757. OCLC 1249799159. OL 34132790M. Wikidata Q111040546.
  2. ^ Herbert, Trevor (2001). "Trombone". Grove Music Online (8th ed.). Oxford University Press. doi:10.1093/gmo/9781561592630.article.A2252542. ISBN 978-1-56159-263-0.
  3. ^ a b "Tenor valve trombone ca. 1863". The Met Museum. The Metropolitan Museum of Art. Retrieved 9 May 2022.
  4. ^ "Alto valve trombone, E♭". National Music Museum. University of South Dakota. 1900 [ca. 1895–1912]. Accession number 03245. Retrieved 17 September 2022. Made in Bohemia; stamped Lyon & Healy, Chicago.{{cite web}}: CS1 maint: postscript (link)
  5. ^ Meucci, Renato (2001). "Cimbasso". Grove Music Online (8th ed.). Oxford University Press. doi:10.1093/gmo/9781561592630.article.05789. ISBN 978-1-56159-263-0.
  6. ^ Kennedy, Gary W. (2001). "Normaphone". Grove Music Online (8th ed.). Oxford University Press. doi:10.1093/gmo/9781561592630.article.J655300. ISBN 978-1-56159-263-0.
  7. ^ "Rare 1884 C.G. Conn Valve-Slide Hybrid Trombone". Worthopedia. WorthPoint Corporation. Archived from the original on 30 May 2022. Retrieved 9 June 2022.
  8. ^ "Really Doubling in Brass". Popular Science. 146 (5): 81. May 1946.
  9. ^ Herbert, Trevor (2006). The Trombone. Yale Musical Instrument Series. New Haven: Yale University Press. ISBN 978-0-300235-75-3. OCLC 1007305405. OL 30593699M. Wikidata Q111039091.
  10. ^ US patent 3937116, Lawrence, Ramirez, "Tenor trombone construction", issued 8 June 1976, assigned to G. Leblanc Corporation, class G10D7/10 
  11. ^ "Trombone Model 'Superbone'". schagerl.com. Schagerl Meisterinstrumente. Retrieved 30 May 2022.
  12. ^ "Superbone (valve/slide trombone) – PB930". www.wessex-tubas.com. Wessex Tubas. Retrieved 31 May 2022.