Three-valued logic

In logic, a three-valued logic (also trinary logic, trivalent, ternary, or trilean, sometimes abbreviated 3VL) is any of several many-valued logic systems in which there are three truth values indicating true, false, and some third value. This is contrasted with the more commonly known bivalent logics (such as classical sentential or Boolean logic) which provide only for true and false.

Emil Leon Post is credited with first introducing additional logical truth degrees in his 1921 theory of elementary propositions. The conceptual form and basic ideas of three-valued logic were initially published by Jan Łukasiewicz and Clarence Irving Lewis. These were then re-formulated by Grigore Constantin Moisil in an axiomatic algebraic form, and also extended to n-valued logics in 1945.

Pre-discovery

Around 1910, Charles Sanders Peirce defined a many-valued logic system. He never published it. In fact, he did not even number the three pages of notes where he defined his three-valued operators. Peirce soundly rejected the idea all propositions must be either true or false; boundary-propositions, he writes, are "at the limit between P and not P." However, as confident as he was that "Triadic Logic is universally true," he also jotted down that "All this is mighty close to nonsense." Only in 1966, when Max Fisch and Atwell Turquette began publishing what they rediscovered in his unpublished manuscripts, did Peirce's triadic ideas become widely known.

Representation of values

As with bivalent logic, truth values in ternary logic may be represented numerically using various representations of the ternary numeral system. A few of the more common examples are:

• in balanced ternary, each digit has one of 3 values: −1, 0, or +1; these values may also be simplified to −, 0, +, respectively;
• in the redundant binary representation, each digit can have a value of −1, 0, 0/1 (the value 0/1 has two different representations);
• in the ternary numeral system, each digit is a trit (trinary digit) having a value of: 0, 1, or 2;
• in the skew binary number system, only the least-significant non-zero digit can have a value of 2, and the remaining digits have a value of 0 or 1;
• 1 for true, 2 for false, and 0 for unknown, unknowable/undecidable, irrelevant, or both;
• 0 for false, 1 for true, and a third non-integer "maybe" symbol such as ?, #, ½, or xy.

Inside a ternary computer, ternary values are represented by ternary signals.

This article mainly illustrates a system of ternary propositional logic using the truth values {false, unknown, true}, and extends conventional Boolean connectives to a trivalent context.

Logics

Boolean logic allows 2² = 4 unary operators; the addition of a third value in ternary logic leads to a total of 3³ = 27 distinct operators on a single input value. (This may be made clear by considering all possible truth tables for an arbitrary unary operator. Given 2 possible values TF of the single Boolean input, there are four different patterns of output TT, TF, FT, FF resulting from the following unary operators acting on each value: always T, Identity, NOT, always F. Given three possible values of a ternary variable, each times three possible results of a unary operation, there are 27 different output patterns: TTT, TTU, TTF, TUT, TUU, TUF, TFT, TFU, TFF, UTT, UTU, UTF, UUT, UUU, UUF, UFT, UFU, UFF, FTT, FTU, FTF, FUT, FUU, FUF, FFT, FFU, and FFF.) Similarly, where Boolean logic has 2^2×2 = 16 distinct binary operators (operators with 2 inputs) possible, ternary logic has 3^3×3 = 19,683 such operators. Where the nontrival Boolean operators can be named (AND, NAND, OR, NOR, XOR, XNOR (equivalence), and 4 variants of implication or inequality), with six trivial operators considering 0 or 1 inputs only, it is unreasonable to attempt to name all but a small fraction of the possible ternary operators. Just as in bivalent logic, where not all operators are given names and subsets of functionally complete operators are used, there may be functionally complete sets of ternary-valued operators.

Kleene and Priest logics

See also: Kleene algebra (with involution)

Below is a set of truth tables showing the logic operations for Stephen Cole Kleene's "strong logic of indeterminacy" and Graham Priest's "logic of paradox".

(F, false; U, unknown; T, true)
NOT(A) A ¬A F T U U T F	AND(A, B) A ∧ B B F U T A F F F F U F U U T F U T	OR(A, B) A ∨ B B F U T A F F U T U U U T T T T T	XOR(A, B) A ⊕ B B F U T A F F U T U U U U T T U F

(−1, false; 0, unknown; +1, true)
NEG(A) A ¬A −1 +1 0 0 +1 −1	MIN(A, B) A ∧ B B −1 0 +1 A −1 −1 −1 −1 0 −1 0 0 +1 −1 0 +1	MAX(A, B) A ∨ B B −1 0 +1 A −1 −1 0 +1 0 0 0 +1 +1 +1 +1 +1	MIN(MAX(A, B), NEG(MIN(A, B))) A ⊕ B B −1 0 +1 A −1 −1 0 +1 0 0 0 0 +1 +1 0 −1

In these truth tables, the unknown state can be thought of as neither true nor false in Kleene logic, or thought of as both true and false in Priest logic. The difference lies in the definition of tautologies. Where Kleene logic's only designated truth value is T, Priest logic's designated truth values are both T and U. In Kleene logic, the knowledge of whether any particular unknown state secretly represents true or false at any moment in time is not available. However, certain logical operations can yield an unambiguous result, even if they involve an unknown operand. For example, because true OR true equals true, and true OR false also equals true, then true OR unknown equals true as well. In this example, because either bivalent state could be underlying the unknown state, and either state also yields the same result, true results in all three cases.

If numeric values, e.g. balanced ternary values, are assigned to false, unknown and true such that false is less than unknown and unknown is less than true, then A AND B AND C... = MIN(A, B, C ...) and A OR B OR C ... = MAX(A, B, C...).

Material implication for Kleene logic can be defined as:

$A\rightarrow B\ {\overset {\underset {\mathrm {def} }{}}{=}}\ {\mbox{OR}}(\ {\mbox{NOT}}(A),\ B)$, and its truth table is

IMPK(A, B), OR(¬A, B) A → B B F U T A F T T T U U U T T F U T

IMPK(A, B), MAX(−A, B) A → B B −1 0 +1 A −1 +1 +1 +1 0 0 0 +1 +1 −1 0 +1

which differs from that for Łukasiewicz logic (described below).

Kleene logic has no tautologies (valid formulas) because whenever all of the atomic components of a well-formed formula are assigned the value Unknown, the formula itself must also have the value Unknown. (And the only designated truth value for Kleene logic is True.) However, the lack of valid formulas does not mean that it lacks valid arguments and/or inference rules. An argument is semantically valid in Kleene logic if, whenever (for any interpretation/model) all of its premises are True, the conclusion must also be True. (The Logic of Paradox (LP) has the same truth tables as Kleene logic, but it has two designated truth values instead of one; these are: True and Both (the analogue of Unknown), so that LP does have tautologies but it has fewer valid inference rules).

Łukasiewicz logic

Further information: Łukasiewicz logic

The Łukasiewicz Ł3 has the same tables for AND, OR, and NOT as the Kleene logic given above, but differs in its definition of implication in that "unknown implies unknown" is true. This section follows the presentation from Malinowski's chapter of the Handbook of the History of Logic, vol 8.

Material implication for Łukasiewicz logic truth table is

IMPŁ(A, B) A → B B F U T A F T T T U U T T T F U T

IMPŁ(A, B), MIN(1, 1−A+B) A → B B −1 0 +1 A −1 +1 +1 +1 0 0 +1 +1 +1 −1 0 +1

In fact, using Łukasiewicz's implication and negation, the other usual connectives may be derived as:

• A ∨ B = (A → B) → B
• A ∧ B = ¬(¬A ∨ ¬ B)
• A ⇔ B = (A → B) ∧ (B → A)

It is also possible to derive a few other useful unary operators (first derived by Tarski in 1921):

• MA = ¬A → A
• LA = ¬M¬A
• IA = MA ∧ ¬LA

They have the following truth tables:

A MA F F U T T T

A LA F F U F T T

A IA F F U T T F

M is read as "it is not false that..." or in the (unsuccessful) Tarski–Łukasiewicz attempt to axiomatize modal logic using a three-valued logic, "it is possible that..." L is read "it is true that..." or "it is necessary that..." Finally I is read "it is unknown that..." or "it is contingent that..."

In Łukasiewicz's Ł3 the designated value is True, meaning that only a proposition having this value everywhere is considered a tautology. For example, A → A and A ↔ A are tautologies in Ł3 and also in classical logic. Not all tautologies of classical logic lift to Ł3 "as is". For example, the law of excluded middle, A ∨ ¬A, and the law of non-contradiction, ¬(A ∧ ¬A) are not tautologies in Ł3. However, using the operator I defined above, it is possible to state tautologies that are their analogues:

• A ∨ IA ∨ ¬A (law of excluded fourth)
• ¬(A ∧ ¬IA ∧ ¬A) (extended contradiction principle).

RM3 logic

The truth table for the material implication of R-mingle 3 (RM3) is

IMPRM3(A, B) A → B B F U T A F T T T U F U T T F F T

A defining characteristic of RM3 is the lack of the axiom of Weakening:

• (A → (B → A))

which, by adjointness, is equivalent to the projection from the product:

• (A ⊗ B) → A

RM3 is a non-cartesian symmetric monoidal closed category; the product, which is left-adjoint to the implication, lacks valid projections, and has U as the monoid identity. This logic is equivalent to an "ideal" paraconsistent logic which also obeys the contrapositive.

HT logic

Further information: Intermediate logic

Further information: Many-valued logic § Gödel logics Gk and G∞

The logic of here and there (HT, also referred as Smetanov logic SmT or as Gödel G3 logic), introduced by Heyting in 1930 as a model for studying intuitionistic logic, is a three-valued intermediate logic where the third truth value NF (not false) has the semantics of a proposition that can be intuitionistically proven to not be false, but does not have an intuitionistic proof of correctness.

(F, false; NF, not false; T, true)

NOTHT(A) A ¬A F T NF F T F

IMPHT(A, B) A → B B F NF T A F T T T NF F T T T F NF T

It may be defined either by appending one of the two equivalent axioms (¬q → p) → (((p → q) → p) → p) or equivalently p∨(¬q)∨(p → q) to the axioms of intuitionistic logic, or by explicit truth tables for its operations. In particular, conjunction and disjunction are the same as for Kleene's and Łukasiewicz's logic, while the negation is different.

HT logic is the unique coatom in the lattice of intermediate logics. In this sense it may be viewed as the "second strongest" intermediate logic after classical logic.

Bochvar logic

Main article: Many-valued logic § Bochvar's internal three-valued logic

This logic is also known as a weak form of Kleene's three-valued logic.

Ternary Post logic

not(a) = (a + 1) mod 3, or

not(a) = (a + 1) mod (n), where (n) is the value of a logic

Modular algebras

Some 3VL modular algebras have been introduced more recently, motivated by circuit problems rather than philosophical issues:

• Cohn algebra
• Pradhan algebra
• Dubrova and Muzio algebra

Applications

SQL

Further information: Null (SQL)

The database structural query language SQL implements ternary logic as a means of handling comparisons with NULL field content. NULL was originally intended to be used as a sentinel value in SQL to represent missing data in a database, i.e. the assumption that an actual value exists, but that the value is not currently recorded in the database. SQL uses a common fragment of the Kleene K3 logic, restricted to AND, OR, and NOT tables.

In SQL, the intermediate value is intended to be interpreted as UNKNOWN. Explicit comparisons with NULL, including that of another NULL yields UNKNOWN. However this choice of semantics is abandoned for some set operations, e.g. UNION or INTERSECT, where NULLs are treated as equal with each other. Critics assert that this inconsistency deprives SQL of intuitive semantics in its treatment of NULLs. The SQL standard defines an optional feature called F571, which adds some unary operators, among which is IS UNKNOWN corresponding to the Łukasiewicz I in this article. The addition of IS UNKNOWN to the other operators of SQL's three-valued logic makes the SQL three-valued logic functionally complete, meaning its logical operators can express (in combination) any conceivable three-valued logical function.

See also

• Binary logic (disambiguation)
• Boolean algebra (structure)
• Boolean function
• Digital circuit
• Four-valued logic
• Paraconsistent logic § An ideal three-valued paraconsistent logic
• Setun – an experimental Russian computer which was based on ternary logic
• Ternary numeral system (and Balanced ternary)
• Three-state logic (tri-state buffer)

Further reading

• Bergmann, Merrie (2008). An Introduction to Many-Valued and Fuzzy Logic: Semantics, Algebras, and Derivation Systems. Cambridge University Press. ISBN 978-0-521-88128-9. Retrieved 24 August 2013., chapters 5-9
• Mundici, D. The C*-Algebras of Three-Valued Logic. Logic Colloquium ’88, Proceedings of the Colloquium held in Padova 61–77 (1989). doi:10.1016/s0049-237x(08)70262-3
• Reichenbach, Hans (1944). Philosophic Foundations of Quantum Mechanics. University of California Press. Dover 1998: ISBN 0-486-40459-5