Super Proton Synchrotron

Coordinates: 46°14′06″N 6°02′33″E / 46.23500°N 6.04250°E / 46.23500; 6.04250
From Wikipedia, the free encyclopedia
Super Proton Synchrotron
Test beamline delivered from the SPS. In photo 20 GeV positrons are used to calibrate the Alpha Magnetic Spectrometer.
General properties
Accelerator typeSynchrotron
Beam typeprotons, heavy ions
Target typeInjector for LHC, fixed target
Beam properties
Maximum energy450 GeV
Physical properties
Circumference6.9 kilometres (4.3 mi)
Coordinates46°14′06″N 6°02′33″E / 46.23500°N 6.04250°E / 46.23500; 6.04250
InstitutionCERN
Dates of operation1976 – present
Preceded bySppS
CERN Complex
Current particle and nuclear facilities
LHCAccelerates protons and heavy ions
LEIRAccelerates ions
SPSAccelerates protons and ions
PSBAccelerates protons
PSAccelerates protons or ions
Linac 3Injects heavy ions into LEIR
Linac4Accelerates ions
ADDecelerates antiprotons
ELENADecelerates antiprotons
ISOLDEProduces radioactive ion beams
MEDICISProduces isotopes for medical purposes

The Super Proton Synchrotron (SPS) is a particle accelerator of the synchrotron type at CERN. It is housed in a circular tunnel, 6.9 kilometres (4.3 mi) in circumference,[1] straddling the border of France and Switzerland near Geneva, Switzerland.[2]

History[edit]

A protonantiproton collision from the UA5 experiment at the SPS in 1982

The SPS was designed by a team led by John Adams, director-general of what was then known as Laboratory II. Originally specified as a 300 GeV accelerator, the SPS was actually built to be capable of 400 GeV, an operating energy it achieved on the official commissioning date of 17 June 1976. However, by that time, this energy had been exceeded by Fermilab, which reached an energy of 500 GeV on 14 May of that year.[3]

The SPS has been used to accelerate protons and antiprotons, electrons and positrons (for use as the injector for the Large Electron–Positron Collider (LEP)[4]), and heavy ions.

From 1981 to 1991, the SPS operated as a hadron (more precisely, proton–antiproton) collider (as such it was called SppS), when its beams provided the data for the UA1 and UA2 experiments, which resulted in the discovery of the W and Z bosons. These discoveries and a new technique for cooling particles led to a Nobel Prize for Carlo Rubbia and Simon van der Meer in 1984.

From 2006 to 2012, the SPS was used by the CNGS experiment to produce a neutrino stream to be detected at the Gran Sasso laboratory in Italy, 730 km from CERN.

Current operations[edit]

The SPS is now used as the final injector for high-intensity proton beams for the Large Hadron Collider (LHC), which began preliminary operation on 10 September 2008, for which it accelerates protons from 26 GeV to 450 GeV. The LHC itself then accelerates them to several teraelectronvolts (TeV).

Operation as injector still allows continuation of the ongoing fixed-target research program, where the SPS is used to provide 400 GeV proton beams for a number of active fixed-target experiments, notably COMPASS, NA61/SHINE and NA62.

The SPS has served, and continues to be used as a test bench for new concepts in accelerator physics. In 1999 it served as an observatory for the electron cloud phenomenon.[5] In 2003, SPS was the first machine where the Hamiltonian resonance driving terms were directly measured.[6] And in 2004, experiments to cancel the detrimental effects of beam encounters (like those in the LHC) were carried out.[7]

The SPS RF cavities operate at a center frequency of 200.2 MHz.

Major discoveries[edit]

Major scientific discoveries made by experiments that operated at the SPS include the following.

Upgrade for high luminosity LHC[edit]

The Large Hadron Collider will require an upgrade to considerably increase its luminosity during the 2020s. This would require upgrades to the entire linac/pre-injector/injector chain, including the SPS.

As part of this, the SPS will need to be able to handle a much higher intensity beam. One improvement considered in the past was increasing the extraction energy to 1 TeV.[10] However, the extraction energy will be kept at 450 GeV while other systems are upgraded. The acceleration system will be modified to handle the higher voltages needed to accelerate a higher intensity beam. The beam dumping system will also be upgraded so it can accept a higher intensity beam without sustaining significant damage.[11]

Notes and references[edit]

  1. ^ "SPS Presentation at AB-OP-SPS Home Page". Archived from the original on 2011-10-05. Retrieved 2008-09-15.
  2. ^ Information on CERN Sites Archived 2012-07-08 at archive.today. CERN. Updated 2010-01-26.
  3. ^ CERN courier
  4. ^ The LEP Collider – from Design to Approval and Commissioning Archived 2014-06-18 at the Wayback Machine, by S. Myers, section 3.8. Last accessed 2010-02-28.
  5. ^ "observation of e-cloud" (PDF). Archived from the original (PDF) on 2011-09-29. Retrieved 2006-07-20.
  6. ^ Measurement of resonance driving terms Archived 2011-07-16 at the Wayback Machine
  7. ^ "wire compensation" (PDF). Archived from the original (PDF) on 2011-09-29. Retrieved 2006-07-24.
  8. ^ "CERN.ch La". Public.web.cern.ch. Retrieved 20 November 2010.
  9. ^ Fanti, V.; et al. (1999). "A new measurement of direct CP violation in two pion decays of the neutral kaon". Physics Letters B. 465 (1–4): 335–348. arXiv:hep-ex/9909022. Bibcode:1999PhLB..465..335F. doi:10.1016/S0370-2693(99)01030-8. S2CID 15277360.
  10. ^ Super-SPS
  11. ^ Hanke, Klaus; Damerau, Heiko; Deleu, Axelle; Funken, Anne; Garoby, Roland; Gilardoni, Simone; Gilbert, Nicolas; Goddard, Brennan; Holzer, Eva Barbara; Lombardi, Alessandra; Manglunki, Django; Meddahi, Malika; Mikulec, Bettina; Shaposhnikova, Elena; Vretenar, Maurizio (2014). "Status of the LIU Project at CERN". Proceedings of the 5th Int. Particle Accelerator Conf. IPAC2014. Petit-Jean-Genaz Christine (Ed.), Arduini Gianluigi (Ed.), Michel Peter (Ed.), Schaa, Volker RW (Ed.): 3 pages, 0.320 MB. doi:10.18429/JACOW-IPAC2014-THPME070.

External links[edit]