Polyphosphazene

From Wikipedia, the free encyclopedia
Polyphosphazene general structure
General structure of polyphosphazenes. Gray spheres represent any organic or inorganic group.

Polyphosphazenes include a wide range of hybrid inorganic-organic polymers with a number of different skeletal architectures with the backbone P-N-P-N-P-N-.[1] In nearly all of these materials two organic side groups are attached to each phosphorus center. Linear polymers have the formula (N=PR1R2)n, where R1 and R2 are organic (see graphic). Other architectures are cyclolinear and cyclomatrix polymers in which small phosphazene rings are connected together by organic chain units. Other architectures are available, such as block copolymer, star, dendritic, or comb-type structures. More than 700 different polyphosphazenes are known, with different side groups (R) and different molecular architectures. Many of these polymers were first synthesized and studied in the research group of Harry R. Allcock.[1][2][3][4][5]

Synthesis[edit]

The method of synthesis depends on the type of polyphosphazene. The most widely used method for linear polymers is based on a two-step process.[1][2][3][4] In the first step, hexachlorocyclotriphosphazene(NPCl2)3 is heated in a sealed system at 250 °C to convert it to a long chain linear polymer with typically 15,000 or more repeating units. In the second step the chlorine atoms linked to phosphorus in the polymer are replaced by organic groups through reactions with alkoxides, aryloxides, amines or organometallic reagents. Because many different reagents can participate in this macromolecular substitution reaction, and because two or more reagents may be used, a large number of different polymers can be produced.. Variations to this process are possible using poly(dichlorophosphazene) made by condensation reactions.[6]

Polyphosphazene synthesis

Another synthetic process uses Cl3PNSiMe3 as a precursor:[7]

n Cl3PNSiMe3 --> [Cl2PN]n + ClSiMe3

Because the process is a living cationic polymerization, block copolymers or comb, star, or dendritic architectures are possible.[8][9] Other synthetic methods include the condensation reactions of organic-substituted phosphoranimines.[10][11][12][13]

Cyclomatrix type polymers made by linking small molecule phosphazene rings together employ difunctional organic reagents to replace the chlorine atoms in (NPCl2)3, or the introduction of allyl or vinyl substituents, which are then polymerized by free-radical methods.[14] Such polymers may be useful as coatings or thermosetting resins, often prized for their thermal stability.

Properties and uses[edit]

The linear high polymers have the geometry shown in the picture. More than 700 different macromolecules that correspond to e group]]s or combinations of different side groups. In these polymers the properties are defined by the high flexibility of the backbone. Other potentially attractive properties include radiation resistance, high refractive index, ultraviolet and visible transparency, and its fire resistance. The side groups exert an equal or even greater influence on the properties since they impart properties such as hydrophobicity, hydrophilicity, color, useful biological properties such as bioerodibility, or ion transport properties to the polymers. Representative examples of these polymers are shown below. Polyphosphazene examples

Thermoplastics[edit]

The first stable thermoplastic poly(organophosphazenes), isolated in the mid 1960s by Allcock, Kugel, and Valan, were macromolecules with trifluoroethoxy, phenoxy, methoxy, ethoxy, or various amino side groups.[2][3][4] Of these early species, poly[bis(trifluoroethoxyphosphazene], [NP(OCH2CF3)2]n, has proved to be the subject of intense research due to its crystallinity, high hydrophobicity, biological compatibility, fire resistance, general radiation stability, and ease of fabrication into films, microfibers and nanofibers. It has also been a substrate for various surface reactions to immobilize biological agents. The polymers with phenoxy or amino side groups have also been studied in detail.

Phosphazene elastomers[edit]

The first large-scale commercial uses for linear polyphosphazenes were in the field of high technology elastomers, with a typical example containing a combination of trifluoroethoxy and longer chain fluoroalkoxy groups.[15][16][17][18] The mixture of two different side groups eliminates the crystallinity found in single-substituent polymers and allows the inherent flexibility and elasticity to become manifest. Glass transition temperatures as low as -60 °C are attainable, and properties such as oil-resistance and hydrophobicity are responsible for their utility in land vehicles and aerospace components. They have also been used in biostable biomedical devices.[19]

Other side groups, such as non-fluorinated alkoxy or oligo-alkyl ether units, yield hydrophilic or hydrophobic elastomers with glass transitions over a broad range from -100 °C to 100 °C.[20] Polymers with two different aryloxy side groups have also been developed as elastomers for fire-resistance as well as thermal and sound insulation applications.

Polymer electrolytes[edit]

Linear polyphosphazenes with oligo-ethyleneoxy side chains are gums that are good solvents for salts such as lithium triflate. These solutions function as electrolytes for lithium ion transport, and they were incorporated into fire-resistant rechargeable lithium-ion polymer battery.[21][22][23] The same polymers are also of interest as the electrolyte in dye-sensitized solar cells.[24] Other polyphosphazenes with sulfonated aryloxy side groups are proton conductors of interest for use in the membranes of proton exchange membrane fuel cells.[25]

Hydrogels[edit]

Water-soluble poly(organophosphazenes) with oligo-ethyleneoxy side chains can be cross-linked by gamma-radiation. The cross-linked polymers absorb water to form hydrogels, which are responsive to temperature changes, expanding to a limit defined by the cross-link density below a critical solution temperature, but contracting above that temperature. This is the basis of controlled permeability membranes. Other polymers with both oligo-ethyleneoxy and carboxyphenoxy side groups expand in the presence of monovalent cations but contract in the presence of di- or tri-valent cations, which form ionic cross-links.[26][27][28][29][30] Phosphazene hydrogels have been utilized for controlled drug release and other medical applications.[27]

Bioerodible polyphosphazenes[edit]

The ease with which properties can be controlled and fine-tuned by the linkage of different side groups to polyphosphazene chains has prompted major efforts to address biomedical materials challenges using these polymers.[31] Different polymers have been studied as macromolecular drug carriers, as membranes for the controlled delivery of drugs, as biostable elastomers, and especially as tailored bioerodible materials for the regeneration of living bone.[32][33][34][35] An advantage for this last application is that poly(dichlorophosphazene) reacts with amino acid ethyl esters (such as ethyl glycinate or the corresponding ethyl esters of numerous other amino acids) through the amino terminus to form polyphosphazenes with amino acid ester side groups. These polymers hydrolyze slowly to a near-neutral, pH-buffered solution of the amino acid, ethanol, phosphate, and ammonium ion. The speed of hydrolysis depends on the amino acid ester, with half-lives that vary from weeks to months depending on the structure of the amino acid ester. Nanofibers and porous constructs of these polymers assist osteoblast replication and accelerate the repair of bone in animal model studies.

Commercial aspects[edit]

No applications are commercialized for polyphosphazenes. The cyclic trimer hexachlorophosphazene ((NPCl2)3) is commercially available. It is the starting point for most commercial developments. High performance elastomers known as PN-F or Eypel-F have been manufactured for seals, O-rings, and dental devices. An aryloxy-substituted polymer has also been developed as a fire resistant expanded foam for thermal and sound insulation. The patent literature contains many references to cyclomatrix polymers derived from cyclic trimeric phosphazenes incorporated into cross-linked resins for fire resistant circuit boards and related applications.

References[edit]

  1. ^ a b c Allcock, H. R., Kugel, R. L. (1965). "Synthesis of High Polymeric Alkoxy and Aryloxyphosphonitriles". Journal of the American Chemical Society. 87 (18): 4216–4217. doi:10.1021/ja01096a056.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  2. ^ a b c Allcock, H. R., Kugel, R. L., Valan, K. J. (1966). "Phosphonitrilic Compounds. VI. High Molecular Weight Poly(alkoxy- and aryloxyphosphazenes)". Inorganic Chemistry. 5 (10): 1709–1715. doi:10.1021/ic50044a016.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  3. ^ a b c Allcock, H. R., Kugel, R. L. (1966). "Phosphonitrilic Compounds. VII. High Molecular Weight Poly(diaminophosphazenes)". Inorganic Chemistry. 5 (10): 1716–1718. doi:10.1021/ic50044a017.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  4. ^ a b c "Allcock Research Group Web Site".
  5. ^ Allcock, Harry R. (2003). Chemistry and Applications of Polyphosphazenes. Wiley-Interscience.
  6. ^ Gleria, M., De Jaeger, R. and Potin, P. (2004). Synthesis and Characterization of Poly(organophosphazenes). New York: Nova Science Publishers.{{cite book}}: CS1 maint: multiple names: authors list (link)
  7. ^ Rothemund, Sandra; Teasdale, Ian (2016). "Preparation of polyphosphazenes: A tutorial review". Chemical Society Reviews. 45 (19): 5200–5215. doi:10.1039/C6CS00340K. PMC 5048340. PMID 27314867.
  8. ^ Honeyman, C. H., Manners, I., Morrissey, C. T., Allcock, H. R. (1995). "Ambient Temperature Synthesis of Poly(dichlorophosphazene) with Molecular Weight Control". Journal of the American Chemical Society. 117 (26): 7035–7036. doi:10.1021/ja00131a040.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  9. ^ Allcock, H. R., Crane, C. A., Morrissey, C. T., Nelson, J. M., Reeves, S. D., Honeyman, C. H., Manners, I. (1996). ""Living" Cationic Polymerization of Phosphoranimines as an Ambient Temperature Route to Polyphosphazenes with Controlled Molecular Weights". Macromolecules. 29 (24): 7740–7747. Bibcode:1996MaMol..29.7740A. doi:10.1021/ma960876j.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  10. ^ Wisian-Neilson, P.; Neilson, R. H. (1980). "Poly(dimethylphosphazene), (Me2PN)n". Journal of the American Chemical Society. 102 (8): 2848–2849. doi:10.1021/ja00528a060.
  11. ^ Neilson, R. H., Wisian Neilson, P. (1988). "Poly(alkyl/arylphosphazenes) and their precursors". Chemical Reviews. 88 (3): 541–562. doi:10.1021/cr00085a005.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  12. ^ Montague, R. A., Matyjaszewski, K. (1990). "Synthesis of Poly[bis(trifluoroethoxy)phosphazene] under Mild Conditions using a Fluoride Initiator". Journal of the American Chemical Society. 112 (18): 6721–6723. doi:10.1021/ja00174a047.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  13. ^ Matyjaszewski, K., Moore, M. M., White (1993). "Synthesis of Polyphosphazene Block Copolymers bearing Alkoxyethoxy and Trifluoroethoxy Groups". Macromolecules. 26 (25): 6741–6748. Bibcode:1993MaMol..26.6741M. doi:10.1021/ma00077a008.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  14. ^ Allen, C. W., Shaw, J. C., Brown, D. E. (1988). "Copolymerization of ((alpha-methylethenyl)phenyl)pentafluorocyclotriphosphazenes with Styrene and Methyl Methacrylate". Macromolecules. 21 (9): 2653–2657. Bibcode:1988MaMol..21.2653A. doi:10.1021/ma00187a001.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  15. ^ Rose, S. H. (1968). "Synthesis of Phosphonitrilic Fluoroelastomers". Journal of Polymer Science Part B: Polymer Letters. 6 (12): 837–839. Bibcode:1968JPoSL...6..837R. doi:10.1002/pol.1968.110061203.
  16. ^ Singler, R. E., Schneider, N. S., Hagnauer, G. L. (1975). "Polyphosphazenes: Synthesis—properties—Applications". Polymer Engineering and Science. 15 (5): 321–338. doi:10.1002/pen.760150502.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  17. ^ US 4945139, Charles H. Kolich; W. Dirk Klobucar & Jeffrey T. Books, "Process for surface treating phosphonitrilic fluoroelastomers", published Jul 31, 1990, assigned to Ethyl Corporation 
  18. ^ Tate, D. P. (1974). "Polyphosphazene Elastomers". Journal of Polymer Science: Polymer Symposia. 48: 33–45. doi:10.1002/polc.5070480106.
  19. ^ Gettleman, L.; Farris, C. L.; Rawls, H. R. & LeBouef, R. J. (1984). "Soft and Firm Denture Liner for a Composite Denture and Method of Fabricating". {{cite journal}}: Cite journal requires |journal= (help)
  20. ^ Weikel, Arlin L.; Lee, David K.; Krogman, Nicholas R.; Allcock, Harry R. (2011). "Phase changes of poly(alkoxyphosphazenes), and their behavior in the presence of oligoisobutylene". Polymer Engineering & Science. 51 (9): 1693–1700. doi:10.1002/pen.21623.
  21. ^ Blonsky, P. M.; Shriver, D. F.; Austin, P. E.; Allcock, H. R. (1984). "Polyphosphazene solid electrolytes". Journal of the American Chemical Society. 106 (22): 6854–6855. doi:10.1021/ja00334a071. Archived from the original on September 24, 2017.
  22. ^ H. R.; O’Connor, S. J. M.; Olmeijer, D. L.; Napierala, M. E.; Cameron, C. G. (1996). "Cation Complexation and Conductivity in Crown Ether Bearing Polyphosphazenes". Macromolecules. 29 (23): 7544–7552. Bibcode:1996MaMol..29.7544A. doi:10.1021/ma960592z.
  23. ^ Fei, S.-T.; Allcock, H. R. (2010). "Methoxyethoxyethoxyphosphazenes as Ionic Conductive Fire Retardant /additives for Lithium Battery Systems". Journal of Power Sources. 195 (7): 2082–2088. Bibcode:2010JPS...195.2082F. doi:10.1016/j.jpowsour.2009.09.043.
  24. ^ Fei, S.-T; Lee, S.-H. A; Pursel, S. M.; Basham, J.; Hess, A.; Grimes, C. A.; Horn, M. W.; Mallouk, T. E.; Allcock, H. R. (2011). "Electrolyte Infiltration in Phosphazene-Based Dye-Sensitized Solar Cells". Journal of Power Sources. 21 (11): 2641–2651. Bibcode:2011JPS...196.5223F. doi:10.1016/j.jpowsour.2011.01.052.
  25. ^ Tang, H.; Pintauro, P. N. (2001). "Polyphosphazene membranes. IV. Polymer morphology and proton conductivity in sulfonated poly[bis(3-methylphenoxy)phosphazene] films". Journal of Applied Polymer Science. 79: 49–59. doi:10.1002/1097-4628(20010103)79:1<49::aid-app60>3.0.co;2-j.
  26. ^ H. R. Allcock; S. Kwon; G. H. Riding; R. J. Fitzpatrick; J. L. Bennett (1988). "Hydrophilic Polyphosphazenes as Hydrogels: Radiation Cr osslinking and Hydrogel Characteristics of Poly[bis(methoxyethoxyethoxy)phosphazene]". Biomaterials. 9 (6): 509–513. doi:10.1016/0142-9612(88)90046-4. PMID 3224138.
  27. ^ a b Kim, J.; Chun, C.; Kim, B.; Hong, J. M.; Cho J.–K; Lee. S. H. & Song, S.–C. (2012). "Thermosensitive/magnetic poly(organophosphazene) hydrogel as a long-term magnetic resonance contrast platform". Biomaterials. 33 (1): 218–224. doi:10.1016/j.biomaterials.2011.09.033. PMID 21975461.
  28. ^ H. R. Allcock; S. R. Pucher; M. L. Turner; R. J. Fitzpatrick (1992). "Poly(organophosphazenes) with Poly(alkyl ether) Side Groups: A Study of Their Water Solubility and the Swelling Characteristics of Their Hydrogels". Macromolecules. 25 (21): 5573–5577. Bibcode:1992MaMol..25.5573A. doi:10.1021/ma00047a002.
  29. ^ . R. Allcock; R. J. Fitzpatrick; K. B. Visscher (1992). "Thin-layer grafts of poly[bis((methoxyethoxy)ethoxy)phosphazene] on organic polymer surfaces". Chemistry of Materials. 4 (4): 775–780. doi:10.1021/cm00022a007.
  30. ^ H. R. Allcock; A. M. A. Ambrosio (1996). "Synthesis and Characterization of pH-Senstitive Poly(organophosphazene) Hydrogels". Biomaterials. 17 (23): 2295–2302. doi:10.1016/0142-9612(96)00073-7. PMID 8968526.
  31. ^ Chen, Feiyang; Teniola, Oyindamola R.; Laurencin, Cato T. (2022-04-01). "Biodegradable polyphosphazenes for regenerative engineering". Journal of Materials Research. 37 (8): 1417–1428. doi:10.1557/s43578-022-00551-z. ISSN 2044-5326. PMC 9531846. S2CID 248257951.
  32. ^ Allcock, H. R.; Pucher, S. R.; Scopelianos, A. G. (1994). "Poly[amino acid ester)phosphazenes] as Substrates for the Controlled Release of Small Molecules". Biomaterials. 15 (8): 563–569. doi:10.1016/0142-9612(94)90205-4. PMID 7948574.
  33. ^ Deng, M., Kumbar, S. G., Wan, Y. Toti, U. S. Allcock, H. R., Laurencin, C. T. (2010). "Polyphosphazene Polymers for Tissue Engineering: An Analysis of Material Synthesis, Characterization, and Applications". Soft Matter. 6 (14): 3119–3132. Bibcode:2010SMat....6.3119D. doi:10.1039/b926402g.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  34. ^ Deng, M., Kumbar, S. G., Nair, L. S. Arlin L. Weikel, A. L, Allcock, H. R., Laurencin, C. T. (2011). "Biomimetic Structures: Biological Implications of Dipeptide-Substituted Polyphosphazene–Polyester Blend Nanofiber Matrices for Load-Bearing Bone Regeneration". Advanced Functional Materials. 21 (14): 2641–2651. doi:10.1002/adfm.201100275. S2CID 96953240.{{cite journal}}: CS1 maint: multiple names: authors list (link)
  35. ^ Allcock, H. R.; Morozowich, N. (2012). "Bioerodible Polyphosphazenes and their Medical Potential". Polymer Chemistry. 3 (3): 578–590. doi:10.1039/c1py00468a.

Further information[edit]

"H. R. Allcock Research Group". Retrieved 2020-08-22.