Normalized frequency (signal processing)

In digital signal processing (DSP), a normalized frequency is a ratio of a variable frequency ( $f$ ) and a constant frequency associated with a system (such as a sampling rate, $f_{s}$ ). Some software applications require normalized inputs and produce normalized outputs, which can be re-scaled to physical units when necessary. Mathematical derivations are usually done in normalized units, relevant to a wide range of applications.

Examples of normalization[edit]

A typical choice of characteristic frequency is the sampling rate ( $f_{s}$ ) that is used to create the digital signal from a continuous one. The normalized quantity, $f'={\tfrac {f}{f_{s}}},$ has the unit cycle per sample regardless of whether the original signal is a function of time or distance. For example, when $f$ is expressed in Hz (cycles per second), $f_{s}$ is expressed in samples per second.^[1]

Some programs (such as MATLAB toolboxes) that design filters with real-valued coefficients prefer the Nyquist frequency $(f_{s}/2)$ as the frequency reference, which changes the numeric range that represents frequencies of interest from $\left[0,{\tfrac {1}{2}}\right]$ cycle/sample to $[0,1]$ half-cycle/sample. Therefore, the normalized frequency unit is important when converting normalized results into physical units.

A common practice is to sample the frequency spectrum of the sampled data at frequency intervals of ${\tfrac {f_{s}}{N}},$ for some arbitrary integer $N$ (see § Sampling the DTFT). The samples (sometimes called frequency bins) are numbered consecutively, corresponding to a frequency normalization by ${\tfrac {f_{s}}{N}}.$ ^[2]^{: p.56 eq.(16)}^[3] The normalized Nyquist frequency is ${\tfrac {N}{2}}$ with the unit 1/N^th cycle/sample.

Angular frequency, denoted by $\omega$ and with the unit radians per second, can be similarly normalized. When $\omega$ is normalized with reference to the sampling rate as $\omega '={\tfrac {\omega }{f_{s}}},$ the normalized Nyquist angular frequency is π radians/sample.

The following table shows examples of normalized frequency for $f=1$ kHz, $f_{s}=44100$ samples/second (often denoted by 44.1 kHz), and 4 normalization conventions:


Quantity	Numeric range	Calculation	Reverse
$f'={\tfrac {f}{f_{s}}}$	$[$ 0, 1/2 $]$ cycle/sample	1000 / 44100 = 0.02268	$f=f'\cdot f_{s}$
$f'={\tfrac {f}{f_{s}/2}}$	[0, 1] half-cycle/sample	1000 / 22050 = 0.04535	$f=f'\cdot {\tfrac {f_{s}}{2}}$
$f'={\tfrac {f}{f_{s}/N}}$	$[$ 0, N/2 $]$ bins	1000 × $N$ / 44100 = 0.02268 $N$	$f=f'\cdot {\tfrac {f_{s}}{N}}$
$\omega '={\tfrac {\omega }{f_{s}}}$	[0, π] radians/sample	1000 × 2π / 44100 = 0.14250	$\omega =\omega '\cdot f_{s}$