2 mm scale

From Wikipedia, the free encyclopedia

2 mm finescale
A 2 mm scale steam locomotive in unpainted condition
Scale2 mm to 1 ft
Scale ratio1:152
Model gauge9.42 mm (0.371 in)
Prototype gaugeStandard gauge
Website2mm Association

2 mm scale, often 2 mm finescale is a specification used for railway modelling,[1] largely for modelling British railway prototypes.[citation needed] It uses a scale of 2 mm on the model to 1 foot on the prototype, which scales out to 1:152.[1] The track gauge used to represent prototype standard gauge (4 feet 8+12 inches) is 9.42 mm (0.371 in).[2] Track and wheels are closer to dead scale replicas than commercial British N.

Standard[edit]

The 2 mm standards[3] were proposed by Mr. H H Groves in the early 1960s and revised to their current specification in November 1963 by Geoffrey Jones.[4] It is similar in size to the slightly larger British N scale at 1:148, and the slightly smaller European/American N scale at 1:160; though it predates both.[citation needed]

Since 2 mm scale is very close to the 1:148 British N scale, a hybrid specification can be modelled by rewheeling proprietary British N-scale models to the 9.42 mm track gauge. This hybrid specification results in a track gauge equivalent to 4 feet 6+78 inches (1,394 mm), slightly narrower than the prototype 4 feet 8+12 inches. There is an advantage however in the narrower gauge as this allows more room for the outside motion of outside cylindered steam locomotives, which must be overscale in order to function correctly. This approach is often recommended for beginners. However, 2 mm-scale and hybrid-scale models do not usually sit well together due to the larger size of the latter.[citation needed]

Supplementary Standards[edit]

Like Protofour, 2 mm standards have been extended to several other prototypes of both wider and narrower gauge with the same tolerances such as Brunel's 7 ft 14 in (2,140 mm) gauge,[5] Japan Rail's 1,067 mm (3 ft 6 in) narrow gauge and so on.

FiNescale Standard[edit]

The FiNescale standard in use for European prototypes is identical to 2mmFS, with the exception of a to-scale rail gauge of 9 mm (0.354 in).[citation needed]

Appreciation[edit]

One major effect of the standard is to improve the appearance of the track as opposed to N scale, where it is overly tall.[1] Linking carriages with three link chains has been successfully achieved in using the standard.[6]

Support[edit]

No ready-to-run models are available in 2 mm scale,[citation needed] and although there is some availability of kits and components, some model-making skill is normally required.[citation needed]

There is an active association, The 2mm Scale Association, for modellers in this scale, who supply components, tools and jigs, publish a bi-monthly magazine, organise local groups, and promote modelling in the scale.[citation needed]

Exhibition layouts[edit]

  • An early example of a 2 mm layout was Rydes Vale which was created in the 1960s by H. H. Grove and his son.[7]
  • The development of the Kineton exhibition layout by the Leamington & Warwick Model Railway Society was feature in series in the British Railway Modelling magazine running from February 2016.[8]

See also[edit]

References[edit]

  1. ^ a b c "Model Railway Scales and gauges explained". World of Railways. 16 January 2019. Smaller Still:N. Retrieved 6 May 2020.
  2. ^ James Taylor (24 December 2014). "A Guide to Scale & Gauge". Alton Model Railway Group. Retrieved 6 May 2021.
  3. ^ "2mm Association Standards". 2mm Association.
  4. ^ "November 1963". 2mm Association Magazine. November 1963. pp. 7–8.
  5. ^ "BGS standards". Broad Gauge Society. Retrieved 11 May 2021.
  6. ^ Dent, George (22 August 2016). Building Coaches: A Complete Guide for Railway Modellers. The Crowood Press Ltd. ISBN 978-1785002052. OCLC 946461948.
  7. ^ Cliff, Nigel (2008). "The Groves and Rydes Vale". Model Railway Journal. No. 185. p. 223. ISSN 0267-3207.
  8. ^ Collins, Mike (February 2016). "Project Layout — Kineton — 2 mm Finescale". British Railway Modelling. pp. 56–59.

Further reading[edit]

External links[edit]